Of the more than 1,500 homes
that John Maher Builders has constructed in middle Tennessee and the Spring Hill community it is the consistency of quality that separates
us from other builders in our market. Many of our
staff and contractors have
been with us for many years, making
the difficult tasks seem routine. Here are just a
few highlights of the construction features that are
a fixture of every John Maher Builders home:
- We use 2" x 12" girders for added strength
in crawl space and slab foundation.
- Bottom plates are bolted to the floors on 4 foot
centers then set in cement, not strapped with metal
strips.
- 2" x 10" Floor joists on 16 inch centers.
- 3/4" inch Toung and Groove plywood floors.
The decking is glued, nailed and then screwed to the
floor joists to minimize the chance of floor squeaks.
- Each home is hand built, one board at a time. Some
builders buy pre-built walls and ceilings to save
on time and money.
- Rafters are also placed 16 inches on centers for
added integrity.
- Copper plumbing is installed below grade as opposed
to using plastic CPVC.
- Metal duct systems are used and then insulated to
minimize heat and cool transfer.
- Dampers are installed to allow home owners access
to shut off heating and cooling to areas of the home
to save them money.
- Thermal pane windows are trimmed out in wood around
and under each window.
- Insulation is stuffed into small openings throughout
the home to prevent outside air infiltration.
- Steel closet rods and wood shelves are used in place
of less expensive wire racks.
- Every home is wrapped in durable OSB. This adds
to the integrity of the home and also minimizes drafts.
- Detailed pre-inspections and orientations are implemented
on every sale.
For more information and a complete list of features for our communties click one of the following links:
|
